Metal office cabinet with doors. 4 / 8 adjustable shelves. H200 x 100 x 45cm hinged doors - 4 shelves. H200 x 120 x 45cm sliding doors - 4 shelves.
H200 x 150 x 45cm sliding doors - 4/8 shelves. H200 x 180 x 45cm sliding doors - 4/8 shelves. DISPATCH TIME - 4 WORKING WEEKS. Choose the colour and size from the drop-down menu located at the top, under the title of the product. The cabinets are made from 0.8 mm thick P01 sheet steel and are fitted with 1.2 mm thick reinforcements, with a 40 mm thick support and rounded external edges (R8).The doors made from bent steel are fitted with a welded reinforcement bar and are provided with a lock and handle with three way opening (top, bottom and centre). The back panels are made of two elements with holes for fixing, using 4.8x9.5 galvanized self threading screws. The sliding doors are reinforced and have a sliding system made from galvanized brackets fitted with nylon covered ball bearings.
The doors are fitted with a Yale type folding lock, for extra safety, and fitted plastic handles. The cabinets, length 100 and 120 cm, height 200 cm, have one compartment with 4 adjustable shelves on a rack of 25mm; the longer length cabinets, have two compartments divided by a partition, with 4 + 4 adjustable shelves. The scratch resistant epoxy powder coating is performed prior to proceeding with Michrosphating neutralization passivating. Drying takes place in a heat tunnel at a progression of (180 °) and a controlled temperature. The metal cabinets are designed and tested according to the following UNI: UNI 8596/84 Stability.
UNI 8603/84 Resistance of flat supports. UNI 8602/84 opening and closing of the doors with shock. UNI 8600/84 deflection with concentrated load. UNI 8607/84 Duration of the doors.
UNI 8606/84 total maximum load tests on finishing Tempered glass. UNI ISO 9227/93 corrosion resistance.
UNI 121501-1 / 01 Fragmentation test. UNI 9427/89 Resistance to light. UNI 8901/86 Resistance to impact. EN 12720/97 Resistance to cold liquids (spots). EN 12721/97 Resistance to wet heat.
EN 12722/97 Resistance to dry heat. EN ISO 1520/95 deep drawing. UNI 9240/87 Adhesion of finishes to base. IF YOU WOULD LIKE AN INVOICE, PLEASE INFORM US, BY MESSAGE, AT THE TIME OF PURCHASING. OTHERWISE IT WILL BE GIVEN IN THE FORM OF A RECEIPT.
FOR ANY PROBLEMS, BEFORE LEAVING A NEGATIVE OR NEUTRAL FEEDBACK. The item "Metal office storage cabinet cupboard 4 / 8 shelves width 45cm" is in sale since Tuesday, November 15, 2016. This item is in the category "Business, Office & Industrial\Office Equipment & Supplies\Office Furniture\Filing Cabinets". The seller is "italfrom" and is located in ITALIA.This item can be shipped to all countries in Europe.